Rangefinder cameras have been used throughout history to quickly and precisely focus. Despite being more compact and lighter than SLR cameras, rangefinder cameras still require getting used to and maintenance.
For many years, golfers have been using rangefinders to measure the distance between themselves and the target they are shooting for. Recent reports have stated that golfers notice that their rangefinders have a foggy film on them, which causes them to be blurry. Why is this happening? Is there a reason that they are becoming blurry? If so, what must be done to get rid of this?
It would be beneficial for us to uncover the hidden causes behind this phenomenon and thereby eliminate this blurry fog over rangefinders without wasting any more time. Let’s get started!
Why is My Rangefinder Blurry?
For the purpose of determining distances between themselves and their target, golfers have been using rangefinders for a long time. It has been noticed that golfers have experienced blurriness or a hazy film over their rangefinders in recent times.
Rangefinders with a lower sensitivity to light are most likely to have this problem. When this problem occurs, it is almost always the lens that is at fault. As a result, all the readings displayed on the rangefinder can become blurry and alter what is being shown.
Therefore, you are required to pay close attention to the lens and exterior of your gadgets when you’re cleaning them. In order to get the best out of them, they need to be clean all the time. This problem may result from a number of things, including blurry exteriors as well as insufficient batteries.
To prevent this from happening, you should replace the batteries periodically. It is easy to replace the old batteries in the battery chamber by simply opening the battery cap and replacing them with the new ones.
Additionally, you need to recalibrate your rangefinder every time you switch from fairways to rough terrain and vice versa if you want clear pictures.
Calibration of the Rangefinder to eliminate Blurriness
When your rangefinder does not show yardage or you see blurred images on the screen, the best thing to do is to change the surroundings of the camera; in some cases, you might discover that you need to calibrate it.
It’s something that the manufacturer recommends you do at least every year or two since there’s a very high possibility that your device’s optics will shift considerably over time due to its sensitive nature.
As a result, there is no need to worry about calibrating your rangefinder. It is quite simple, and it takes you very little effort.
In order to proceed, you need to follow the following steps:
- Turn off your device.
- Remove any lens caps that are attached.
- Point the rangefinder at something at least 50 yards away.
- Press and hold down both buttons until the word “Calibrating” appears on the screen.
After a few moments, you will see the words “calibrating”, and then the issue of the rangefinder being blurry should be solved.
Conclusion
In the above discussion, we have tried to explain in detail why the rangefinders get blurry, and a thin film coat is put over them unintentionally. Once you are able to follow the right instructions, you can get rid of the foggy or blurry view. You can also take a clear view through your rangefinder once the fog or blurriness has been removed.
Maintaining any gadget in the best possible condition is the most effective way to resolve any problem. Maintaining golf rangefinders requires periodic cleaning and changing of the batteries after a while. It is essential that you take good care of your equipment and gadgets so that they can also look after you.
